Drg 5000 Mobile Secondary Crushing Plant

DRG 5000 system is all collected in one single platform and can be transported with a truck. The R-D group has designed this series for short term installation . This crushers can easily do the work of classical plants . This machines are the most prefered in Turkish market and the World market .

Existing machinery and equipment in the system ;

DRG 5000 HYDRO CONE SYSTEM

Hydro Cone Type   : HYDRO 300
Feeding Size : Can be set up depending on the demand
Opening and closing Safety Locked Hydraulic Piston : 2 pieces
Motor power : 200 kw
Conic crusher jaws are 16-18% manganese and chrome alloy.
The adjustment blocks have a hydraulic adjustment mechanism for easy adjustment.
When a material that can not break into the crusher enters, the hydraulic overload prevention device turns on   and the crusher elements are protected.

* Main Conveyor Belt System
It is 1000mm wide and is of palette type. Drive drums are rubber coated and threaded. The gear units are 3 transmission type and the new generation is with torque connection system. Side scraper system is available to prevent outflow.

* Vibrating Screen System
Screen Size :2200 X 5500 mm
Motor Power: 22 kw
Stages : 3 Stairs
Special type bearing suitable for vibration.

* Under-Sieve Stock Conveyor Belt System
It is 1000 mm wide and foldable type. Drive drums are rubber coated and threaded. The gear units are 3 transmission type and the new generation is with torque connection system. A side scraper system is available to prevent spillage of the final product into the stock area during crushing. Foldable with hydraulic piston for easy assembly and disassembly of the system.

* Stock Conveyor Belt System
There are 2 units, 600mm wide folding type.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
A side scraper system is available to prevent spillage of the final product into the stock area during crushing.
Foldable with hydraulic piston for easy assembly and disassembly of the system.

* Feedback Conveyor Belt System 1
It is 600 mm wide.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
Side scraper system is available to prevent outflow.

* Feedback Conveyor  Belt System 2
It is 600 mm wide and is of palette type.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
Side scraper system available to prevent outflow.

* By-Pass Conveyor Belt System
It is 500 mm wide.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
Foldable with hydraulic piston for easy installation and disassembly of the system
Side scraper system is available to prevent outflow.

* Mobile Chassis System
It is equipped with 3 axle, air-operated brake system and signaling system. Special heavy duty construction chassis. There are 6 hydraulic feet mechanisms in the hydraulic system. These feet are strengthened by the fixed feet after they are locked.
Hydraulic Power System thanks to 125 litre, all pistons are controlled by special control system.

* Panel and Control System
The material is Siemens branded. The panel system has a remote control system that operates with radio control frequency. In addition, the panel system is specially insulated against dust and water. Although the used panel is insulated against dust and water, DRG Machine contains a system that can remove our panel systems from the main scale by about 8 metres.

* Platforms In this new generation crushing screening system
There is a platform system to monitor the machine operation on the crusher. There are also private security guards that are used in this platform exit. There is also a two-sided wall and intervention platform around the sifting system, right and left side.

* PLC Control System PLCs (Programmable Logic Controller)
Which is one of the most important parts of automation, are used in a variety of brands, but Schneider Electric PLC’s are preferred. In terms of production speed and automation of the PLCs, the production has contributed to a great extent. It has been programmed to prevent human errors. This system is used for eliminating the mistakes that occur in the production staff and for smooth operation.

* All functions can be controlled with Remote Control (Radio Control System).

– The dust suspension control system prevents dusting by conveying high pressure water to the conveyor to spray the dust.
– Electric Motors IE2 is a highly efficient type.
– Conveyor belt systems EP 125 and EP 160 are suitable for long use with 10 and 14 mm thick cortex.

Total Motor Power: 240 kw
Maximum Feeding Size: 250 mm
Ideal Feeding Size: 0-250 mm
Final Size: Can be set to give a final product of 0 – 20 mm or larger. (0 – 5 mm, 5 – 12 mm, 12 – 20 mm, or any other three types of material and also by-pass output)
Capacity is variable according to the material feed and final product dimensions to be broken and it is 200-300 ton capacity.

Additional Standard Features in the System
– Dust Suspension Control  System.

Optional Features
– Magnetic Magnet Conveyor Belt (Optional)
– The Generator System is optional and is powered by diesel engines from Cummins, Perkins, Doosan, Deutz and Marelli or Stanford alternators. (Optional)

All of our products are CE certified.